Aircraft Design Seminar - Lecture 2

21 October 2026, J. Schlittenhardt

General information

Dates and contact information on the Ilias Slides at the Beginning, don't use another way of contacting

presentation is 35% of grade, report (due 2/2/27) is 65%

Task by Airbus future projects office

Design of a Battery-Powered Commuter Aircraft

Design a battery-electric powered, 19 seater commuter aircraft, which can be operated efficiently from short runways.

requirements and constraints

Background

commuter aircraft are typically used on islands and coasts, remote and rural regions. They use short, unpaved airfields

CS-23 is simpler to certify and test, but also introduces limitations:

Reference Aircraft

Given reference airfraft data are published or estimated values for an aircraft similar to the Do228

hint:
be careful how you define max landing weight and max takeoff weight for battery-powered aircraft

hint:
don't forget about reserves, they are a large portion of total fuel carried on short flights

Everything regarding the reference aircraft can be found on the slides

Where to start the Aircraft Design?

  1. Understand the market need and listen to the customer
  2. Select a concept
  3. Do the Sizing & Optimization
  4. Do it once more!

Fuselage

built around the payload - only component of the aircraft with which an airline creates revenue, all other components are important but create consts only

Inside-out-approach

appropriate design points for cross section shape are defined by payload and operational needs. comfort is not the only driver

  1. Design Points definition
  2. Emergency exits
  3. Layout flexibility
  4. Ground operations and emergency slide arrangement

Formulas for Aerodynamic Efficiency (L/D), Engine Efficiency and Aircraft Mass (structural efficiency) can be found on slides 12 onwards

Wing design

The wing design, in particular the wing span and to some extend the wing area are the biggest river for the aerodynamic efficiency of an aircraft.

design usually ends up shortly before drag divergence

Improve Thermal efficiency, Improve propulsive efficiency, Engine Integration

Engine position is defined by several inputs

Landing Gear Integration

The Main Landing Gear needs to be located aft of the most aft CG on ground and the wing needs to be located that the aircraft neutral point is aft of the most aft CG in flight (longitudinal stability criteria)

Additional stuff:

Some electric flight considerations

Do not exceed 80 pages (without appendix)
Use the consultation hours